Description

Perfection to the last blade

Perfect forage can only be harvested by perfect machines. Fendt Slicer disc mowers give you a perfect, consistent cutting height – for impressive mowing results. You'll be thrilled with the feed quality. Power par excellence – we combine a Slicer front mowing unit and a butterfly mowing combo at the rear; it's an unbeatable mowing experience that's all down to a whole host of clever details.

Your practical requirements are what makes a Fendt Slicer disc mower. Intelligent lightweight design and maximum service life go hand in hand at Fendt, ensuring ease-of-use and low fuel consumption. Innovative drives reduce fuel demands. Choose from 16 front mowing units and 26 rear or side mowing units – the right combination for every requirement.
 

Maximum soil protection

The patented TurboLift system on the Fendt Slicer rearmounted mowers with centre suspension and the Slicer FQ front mower, provides for a floating cut, exceptional sward protection and forage quality. The forage always stays free of dirt even in wet and damp areas.

 

 

Working Width

Number of cutting discs

Slicer 860

8,30 / 8,60 m

2 x 6

Slicer 911 TLKC

8,30 m

2 x 6

Slicer 911 TLRC

8,30 m

2 x 6

Slicer 860

9,30 / 9,60 m

2 x 7

Slicer 991 TLKC

9,30 m

2 x 7

Slicer 9314 TLKCB

9,30 m

2 x 7

Slicer 860

8,30 / 8,60 m

2 x 6

 

Infinitely adjustable

Before mowing, set the relief pressure you want in the TurboLift system. The mower pressure can then be relieved further at any time on the go, and the preselected pressure restored. This allows it to react extremely flexibly to changing conditions. On headlands, the system always calibrates itself. Alongside perfect forage quality, TurboLift means that little tractive power is required and also means significant fuel savings. At the push of a button on the TurboLift valve block, you can completely relieve the cutting unit pressure and park it safely and easily.
 

Swinging protection

SafetySwing is the patented, mechanical impact guard of the Fendt Slicer mower combinations. Here, both cutting units can be triggered separately if an obstacle is hit, the pivot point being in the centre of the mower combination. Due to the large lever arm, the mower units swing safely up and to the rear, and therefore pass over the obstacle. They then return automatically to the operating position, so that you can continue working without interruption.
 

Folds into a compact unit

Even at an operating width of 9.60 m, the transport height remains below 4 m. This is achieved thanks to the deep-seated cylinder on the lift arm. The centre of gravity of the mower combination is also moved a long way down, meaning that the Fendt Slicer TL handles very well on the roads. The mower combination is towed safely in the folded position, to save space! Thanks to the modular principle of the Fendt Slicer mower combinations, tines and roller conditioners can be retrofitted at any time.
 

Perfection right from the start – the spur gear drive

The Fendt Slicer disc mowers and mower combinations with spur gear drive are perfectly adapted to the requirements in grassland. The mowers feature a lightweight design, which reduces ground pressure. The cutterbeds are very flat, for an exceptional cutting pattern and the best forage flow. It is powered by an elastic V-belt drive which drives the first cutting disc with the spur wheel via a transmission shaft from above. The force travels from spur wheel to spur wheel to ensure an even release of power to all the mower discs. This means that the entire width is mowed cleanly and safely without the forage being pushed up. The V-belt provides an efficient powertrain function and also serves as overload protection. Cutting discs are also protected via a shear bolt.
 

Perfect protection, quick maintenance

Any Fendt Slicer disc mower with compact angle drive is multi-protected against overload. All models are fitted with either a V-belt drive or a slip clutch in the drive train, and also has a impact guard. The individual cutting discs are also protected by DriveGuard discs. If an individual cutting disc is blocked, the DriveGuard disc articulates at six break points, and interrupts the drive train. In just a few minutes, the DriveGuard disc can be replaced cost-effectively and you can continue to work. The DriveGuard cutting disc guard sits outside the cutterbed. This means you don't need to open it to repair it.

Link to Fendt Website: https://www.fendt.com/au/slicer-highlights

Enquiry

In order to assist us in reducing spam, please type the characters you see:

You may also like